View Revisions: Issue #3540

Summary 0003540: Call sign lookup sources don't consistently report success, error status
Revision 2019-11-06 16:29 by WA9PIE
Steps To Reproduce 1) Fire up the Logbook. No particular database necessary
2) Use the "Call sign Lookup" command in the "Config" tear-off in the "Tools" menu
3) In the "Enabled" tab, enable all sources
4) Make sure they're correctly configured on whatever other tabs necessary.
5) press "Apply"
6) Use the "Test" tab to test a good call sign

BUG#1) in the result grid, not all sources report error or success; each should say "OK" at least, and if failed, should give a brief description of the failure (like "Not Found" or "Bad Config").





Revision 2019-11-02 23:12 by K7ZCZ
Steps To Reproduce
1) Fire up the Logbook. No particular database necessary
2) Use the "Call sign Lookup" command in the "Config" tear-off in the "Tools" menu
3) In the "Enabled" tab, enable all sources
4) Make sure they're correctly configured on whatever other tabs necessary.
5) press "Apply"
6) Use the "Test" tab to test a good call sign

BUG#1) in the result grid, not all sources report error or success; each should say "OK" at least, and if failed, should give a brief description of the failure (like "Not Found" or "Bad Config").