View Issue Details

IDProjectCategoryView StatusLast Update
00016801 - BacklogBugpublic2018-11-30 23:38
ReporterKB3NPHAssigned To 
PriorityhighSeveritymajorReproducibilityalways
Status newResolutionopen 
Summary0001680: Supported CAT options in Alinco SR8/9
DescriptionTicket #362743

1. At startup the controls for MODE, AGC, VFO A/B,... are not updated.
2. Switching VFO A/B works, but the buttons are still not updated.
3. Switching TX POWER (High, Low, S-Low) works, but the button/dropdown remains on "High".
4. Tuning below 10 MHz is not possible (HRD display works but the radio does not follow)
5. PTT does not switch to TX but switches off RX

The implementation of frequency limits would be nice to avoid tuning to frequencies that make no sense. I don't know if other radios have that feature.

RF Gain (Preamp/Attenuator) would also be nice to have. (AL~RR_RFG, AL~RW_RFG, Two digits 00=0db 01=-10db 02=-20db 03=+10db)
TagsAlinco, DX-SR9
ModuleRig Control
Sub-ModuleFunctional
Testing

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2014-07-30 10:01 KB3NPH New Issue
2014-08-07 13:23 WA9PIE Summary Bug Ticket #438373 Supported CAT options in Alinco SR8/9 => Bug: Supported CAT options in Alinco SR8/9
2014-08-07 13:23 WA9PIE Description Updated View Revisions
2015-09-17 13:17 WA9PIE Category Rig Control => Bug
2015-09-17 13:19 WA9PIE Project @5@ => 1 - Backlog
2015-09-22 23:44 WA9PIE Fix Build TBD => (select)
2015-09-22 23:44 WA9PIE Summary Bug: Supported CAT options in Alinco SR8/9 => Supported CAT options in Alinco SR8/9
2018-11-28 01:27 WA9PIE Tag Attached: Alinco DX- SR9
2018-11-30 23:38 WA9PIE Tag Attached: Alinco
2018-11-30 23:38 WA9PIE Tag Attached: DX-SR9
2018-11-30 23:38 WA9PIE Tag Detached: Alinco DX- SR9