View Issue Details
| ID | Project | Category | View Status | Date Submitted | Last Update |
|---|---|---|---|---|---|
| 0001987 | 1 - Backlog | Bug | public | 2017-02-27 15:05 | 2019-06-15 11:30 |
| Reporter | NT9E | Assigned To | |||
| Priority | normal | Severity | minor | Reproducibility | always |
| Status | feedback | Resolution | open | ||
| Platform | PC | OS | Windoze | OS Version | 10 |
| Summary | 0001987: Icom 7200 will not come out of Split mode by clicking on a simplex spot | ||||
| Description | After clicking on spot with QSX data, radios goes into spilt mode at the proper frequencies on VFA-A/VFO-B. Then, clicking on a simplex spot will not change the radio back to non-Split status. | ||||
| Steps To Reproduce | After clicking on spot with QSX data, radios goes into spilt mode at the proper frequencies on VFA-A/VFO-B. Then, clicking on a simplex spot will not change the radio back to non-Split status. | ||||
| Tags | IC-7200, ICOM | ||||
| Module | Logbook | ||||
| Sub-Module | |||||
| Testing | |||||
|
|
Updating these to Feedback, as all have questions or need re-tested. |
|
|
CDXClusterDlg::SplitOnIcom() in DXClusterDlgSplit doesn't specifically handle the IC-7200, so it falls into some code generic to Icom radios that we don't specifically handle. Symmetrically, CDXClusterDlg::SplitOffIcom() doesn't specifically handle the IC-7200 either, so that also falls into some generic code. The likely cause of this issue is that the IC-7200 itself, or the IC-7200 configuration in Rig Control, isn't compatible with the generic Icom split on/off code. |
| Date Modified | Username | Field | Change |
|---|---|---|---|
| 2017-02-27 15:05 |
|
New Issue | |
| 2018-06-23 18:24 | WA9PIE | Project | 1 - Backlog => Issues Needing Retest |
| 2018-06-23 18:24 | WA9PIE | Category | Bug => General |
| 2018-06-23 23:13 | WA9PIE | Category | General => Bug |
| 2018-07-25 12:53 | WA9PIE | Status | new => feedback |
| 2018-07-25 12:53 | WA9PIE | Note Added: 0005814 | |
| 2018-11-30 09:24 | K7ZCZ | Note Added: 0006495 | |
| 2018-11-30 09:25 | PD9FER | Tag Attached: Icom IC-7200 | |
| 2018-11-30 16:37 | WA9PIE | Tag Attached: ICOM | |
| 2018-11-30 16:38 | WA9PIE | Tag Attached: IC-7200 | |
| 2018-11-30 16:38 | WA9PIE | Tag Detached: Icom IC-7200 | |
| 2019-02-05 22:33 | WA9PIE | Project | Issues Needing Retest => 2 - Next Dev List (Holding Area) |
| 2019-06-15 11:30 | WA9PIE | Project | 2 - Next Dev List (Holding Area) => 1 - Backlog |
