View Issue Details

IDProjectCategoryView StatusLast Update
00022801 - BacklogBugpublic2019-02-26 18:13
ReporterKB3NPHAssigned To 
PrioritynormalSeveritymajorReproducibilityhave not tried
Status newResolutionopen 
Summary0002280: Flex 6700 not going into split when QSX freq is shown
DescriptionThe following information is from a message Bruce received from Flex about this issue. It may be helpful in solving the problem.

Tim - W4TME (Customer Experience Manager)replied to this question:QSX on spot causes 6700 toRX on TX freq
I suspect that the slice is being tuned to the frequency that HRD has instructed it via a CAT command. I also suspect that HRD is not putting the radio into split mode, so the radio is in simplex mode. Simply opening a 2nd slice does not put the radio into split mode; the ZZSW command has to be issued by HRD to put the radio into split mode and to take it out when it is done.
Additional InformationTicket #974779
Tags6700, FlexRadio
ModuleRig Control
Sub-ModuleFunctional
TestingNot Started

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2017-11-15 09:52 KB3NPH New Issue
2018-11-27 23:44 WA9PIE Tag Attached: Flex 6700
2018-11-30 23:42 WA9PIE Tag Attached: FlexRadio
2018-11-30 23:42 WA9PIE Tag Attached: 6700
2018-11-30 23:42 WA9PIE Tag Detached: Flex 6700
2019-02-26 18:13 WA9PIE Summary Ticket #974779 - Flex 6700 not going into split when QSX freq is shown => Flex 6700 not going into split when QSX freq is shown
2019-02-26 18:13 WA9PIE Additional Information Updated View Revisions