View Issue Details

IDProjectCategoryView StatusLast Update
00029382 - Next Dev List (Holding Area)Bugpublic2020-07-02 02:12
ReporterK7ZCZAssigned To 
PrioritynormalSeverityminorReproducibilityhave not tried
Status newResolutionopen 
Summary0002938: Rig Control: some IC-7851 buttons not working, missing
DescriptionA customer made a report about some buttons for the IC-7851 not working or being correctly labelled in Rig Control.

These concerns aren't particularly easy to fix as I don't have access to an IC-7851.

This was originally entered as a note 2710, and separated here for more effective tracking.
Additional InformationCustomer comment:
I just made a smoke test:

1. I see the buttons now – and they work!, as far as I was able to test them in the short time.
2. At a first glance, I am missing some buttons:

a. The MP-W and the MP-R buttons; I like to use them quite often.

b. The V/M button; you replaced it with the two buttons VFO and MEM ?

c. The M = S button should rather read M > S;
 on the 7851 front panel, this button always copies from M to S, independently of which receiver (main or sub) is active.

d. The APF button; on the “real” 7851 it is combined with the TPF button. In your HRD layout it is missing.
 However, I accept that this APF button is not so important to see it in HRD since this function is depending to the adjustment of the allocated knob on the TRX’ front panel.

e. It would be nice to have the “Main” and “Sub” button side by side instead of one above the other. This would be more like the arrangement on the 785’1 front panel.

f. In my 7851, I have inhibited to be able to switch the antenna matrix via remote control – for safety reasons. It would however be nice to be able to toggle between the programmed TX Antenna (1, 2, 3 or 4) to the RX-I/O antenna .
 This is a function I use very often during contesting.

3. There may be more nice “cosmetics” possible. For the moment I am happy to see the working buttons in HRD. Congratulations!
TagsIC-7851, ICOM
ModuleRig Control
Sub-ModuleRadio Support
TestingNot Started


related to 0002710 closedK7ZCZ Ham Radio Deluxe No Buttons are showing in Rig Control when connected to an IC-7851 



2019-01-21 06:03

updater   ~0007055

Ticket #350643
Got a new report:
At the moment some sliders (e.g. Treble / Bass) at my RIG CONTROL are not working with my IC-7851

Issue History

Date Modified Username Field Change
2018-11-07 20:52 K7ZCZ New Issue
2018-11-07 20:53 K7ZCZ Relationship added related to 0002710
2018-11-27 22:03 WA9PIE Tag Attached: Icom IC-7851
2018-11-30 16:56 WA9PIE Tag Attached: ICOM
2018-11-30 16:56 WA9PIE Tag Attached: IC-7851
2018-11-30 16:56 WA9PIE Tag Detached: Icom IC-7851
2019-01-21 06:03 PD9FER Note Added: 0007055
2020-07-02 02:12 WA9PIE Project 3 - Current Dev List => 2 - Next Dev List (Holding Area)