View Issue Details

IDProjectCategoryView StatusLast Update
00029661 - BacklogBugpublic2019-01-19 23:22
ReporterKB3NPHAssigned ToK7ZCZ 
PriorityhighSeverityminorReproducibilityhave not tried
Status feedbackResolutionopen 
Summary0002966: FT-1000mp MKV Field does not change mode automatically
DescriptionCustomer reports that with the above radio, if he is operating voice on 20m USB, when he switches to 40m, the radio stays in USB instead of switching to LSB as it should. It also doesn't change if he's working digital on 40m USB and switches to the upper VOICE portion of the 40m band, it stays in USB and doesn't switch to LSB as it should.

TagsFT-1000mp MKV Field
ModuleRig Control
TestingNot Started



2018-12-06 23:05

developer   ~0006545

Is the problem that the radio is expected to switch modes with frequency and HRD is preventing it from doing so?

Or is the problem that HRD is expected to switch the radio's modes with frequency, and it is not doing so?

Aren't modes dependent on the local band plan? How would HRD (or the radio) know what regulations are in effect for the user?


2019-01-19 23:19

administrator   ~0007038

HRD should know whether to switch to USB or LSB depending on the band segment of the frequency due to the select ITU zone selection made in Rig Control GUI, "Selections Icon > Band > select the proper ITU Zone" as shown in the attached image.

Issue History

Date Modified Username Field Change
2018-12-05 10:26 KB3NPH New Issue
2018-12-05 10:26 KB3NPH Tag Attached: FT-1000mp MKV Field
2018-12-06 23:05 K7ZCZ Assigned To => K7ZCZ
2018-12-06 23:05 K7ZCZ Status new => feedback
2018-12-06 23:05 K7ZCZ Note Added: 0006545
2018-12-21 10:19 K7ZCZ Assigned To K7ZCZ => KB3NPH
2019-01-19 23:19 KB3NPH File Added: ITU Zone Band Plan Selection.jpg
2019-01-19 23:19 KB3NPH Note Added: 0007038
2019-01-19 23:20 KB3NPH Assigned To KB3NPH => K7ZCZ
2019-01-19 23:21 KB3NPH Assigned To K7ZCZ => KB3NPH
2019-01-19 23:22 KB3NPH Assigned To KB3NPH => K7ZCZ