View Issue Details

IDProjectCategoryView StatusLast Update
00032933 - Current Dev ListBugpublic2019-09-23 06:15
ReporterK7ZCZAssigned ToK7ZCZ 
Status resolvedResolutionfixed 
Product Version6.5.0.207 
Target VersionFixed in Version6.7.0.226 
Summary0003293: "OVL" indicator for IC-7610 in Rig Control doesn't work correctly
The "OVL" indicator should indicate a front-end overload, just as the same indicator on the radio does. It doesn't work right.
Steps To Reproduce
1) Start up Rig Control.
2) Connect to your IC-7610
3) Tune to a strong station. Attenuator off, RF gain up. This should get the OVL indicator in the radio flashing.

BUG#1) In Rig Control, the OVL indicator is on solid. If squelch is closed, OVL goes out. Seems like OVL directly follows the SQL indicator -- it shouldn't, they're correlated but independent.
TagsIC-7610, ICOM
ModuleRig Control
Sub-ModuleRadio Support
TestingNot Started



2019-04-23 12:14

administrator   ~0007877

fixed with this checkin in the 6.7 branch:
Changeset 4953: first cut at IC-9700 support (Mantis 3189)


2019-09-23 06:15

updater   ~0008606

Cannot see the OVL indicator on the Rig Control screen. Not many strong signals so used a broadcast station which was 40db over S9.

Issue History

Date Modified Username Field Change
2019-04-14 19:38 K7ZCZ New Issue
2019-04-14 19:38 K7ZCZ Tag Attached: IC-7610
2019-04-14 19:38 K7ZCZ Tag Attached: ICOM
2019-04-23 12:14 K7ZCZ Assigned To => K7ZCZ
2019-04-23 12:14 K7ZCZ Status new => resolved
2019-04-23 12:14 K7ZCZ Resolution open => fixed
2019-04-23 12:14 K7ZCZ Note Added: 0007877
2019-06-15 11:36 WA9PIE Project 3 - Current Dev List => 2 - Next Dev List (Holding Area)
2019-08-30 13:40 K7ZCZ Project 2 - Next Dev List (Holding Area) => 3 - Current Dev List
2019-08-30 15:16 K7ZCZ Fixed in Version =>
2019-09-23 06:15 g3ucq Note Added: 0008606