View Issue Details

IDProjectCategoryView StatusLast Update
00033651 - BacklogBugpublic2019-06-17 06:14
ReporterPD9FERAssigned To 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
Summary0003365: FT-920 Rig Control sends Mode AFSK instead of USB DATA
DescriptionI was operating ft8 mode along WSJTX.
All was running fine after last update when trying to run again wsjtx which was configured to run along hrd for logging and cat purposes , it keep coming back with error message : Ham Radio Deluxe sent an unrecognised mode error message .

When my radio is set to data mode it appears to be shown on HRD screen like AFSK as I attached to this email... if I switch to usb than WSJTX will run on receive mode but cannot transmit because my transceiver uses the connector on the back of transceiver as digital mode .... it was all ok before the update . With this version of HRD I lost the usb digital mode because it shows like AFSK wich (as it looks like is not recognised by WSJTX)...
Steps To ReproduceConnect FT-920
Set it to USB Data mode
Rig control will display AFSK instead of USB-D
It also sends that mode to WSJT-X when you use HRD as radio control in WSJT-X

Additional InformationTicket #721930

Screenshots are in the Ticket since I can't attach images at this moment.
When reverting to V6.4.0.902 the correct mode is displayed and sent.
TagsFT-920, Yaesu
ModuleRig Control
Sub-ModuleRadio Support
TestingNot Started

Activities

There are no notes attached to this issue.

Issue History

Date Modified Username Field Change
2019-06-17 06:14 PD9FER New Issue
2019-06-17 06:14 PD9FER Tag Attached: FT-920
2019-06-17 06:14 PD9FER Tag Attached: Yaesu