View Issue Details

IDProjectCategoryView StatusLast Update
00035771 - BacklogEnhancementpublic2019-11-12 10:23
ReporterPD9FERAssigned To 
PrioritynormalSeverityminorReproducibilityalways
Status newResolutionopen 
Summary0003577: TS-990 commands not correct
DescriptionDuring an investigation with Jozef @ Microham on why the Microham Microkeyer 3 would not initiate correctly in HRD the following cat command issues were observed:
Neither log shows anything harmful, but there are a lot of HRD commands which are not issued correctly or are not implemented in the TS-990S, to which radio responds with ?; response. These commands waste bandwidth but don't cause any lock up. Looks like driver is just copy/paste from some single receiver Kenwood radio.

Below you can find cut from log you've sent, problem is everywhere where is shown (Syntax error (or busy) comment. I'm attaching command reference manual of TS-990S for your review.

Improperly implemented commands are:

AP0; (wrong command syntax)
SA; (invalid command, doesn't exist)
BC; (wrong command syntax)
FS; (wrong command syntax)
NB; (invalid command, doesn't exist)
TO; (wrong command syntax)
CA; (wrong command syntax)
SC; (invalid command, doesn't exist)
RA; (wrong command syntax)

1359566750: H1-TX: (0) PA1;
1359566765: A-RX: (1) PA11;
1359566781: H1-TX: (0) AP0;
1359566781: A-RX: (1) ?; (Syntax error (or busy))
1359566796: H1-TX: (1) XT;
1359566812: H1-RX: (1) XT0;
1359566812: H1-TX: (1) AM;
1359566828: H1-RX: (1) AM0;
1359566828: H1-TX: (1) SA;
1359566828: H1-RX: (1) ?; (Syntax error (or busy))
1359566828: H1-TX: (1) BC;
1359566843: H1-RX: (1) ?; (Syntax error (or busy))
1359566843: H1-TX: (1) BC;
1359566843: H1-RX: (1) ?; (Syntax error (or busy))
1359566843: H1-TX: (1) BC;
1359566859: H1-RX: (1) ?; (Syntax error (or busy))
1359566859: H1-TX: (1) TS;
1359566875: H1-RX: (1) TS0;
1359566875: H1-TX: (1) FS;
1359566875: H1-RX: (1) ?; (Syntax error (or busy))
1359566875: H1-TX: (1) NB;
1359566875: H1-RX: (1) ?; (Syntax error (or busy))
1359566875: H1-TX: (1) MF;
1359566890: H1-RX: (1) MF0;
1359566890: H1-TX: (1) TO;
1359566906: H1-RX: (1) ?; (Syntax error (or busy))
1359566921: H1-TX: (1) VX;
1359566921: H1-RX: (1) VX0;
1359566921: H1-TX: (1) CA;
1359566937: H1-RX: (1) ?; (Syntax error (or busy))
1359566937: H1-TX: (1) PR0;
1359566953: H1-RX: (1) PR00;
1359566968: H1-TX: (1) BY;
1359566984: H1-RX: (1) BY10;
1359566984: H1-TX: (1) BY;
1359567000: H1-RX: (1) BY10;
1359567000: H1-TX: (1) MF;
1359567015: H1-RX: (1) MF0;
1359567015: H1-TX: (1) SC;
1359567031: H1-RX: (1) ?; (Syntax error (or busy))
1359567031: H1-TX: (1) RA;
1359567046: H1-RX: (1) ?; (Syntax error (or busy))
1359567046: H1-TX: (1) SA;
1359567046: H1-RX: (1) ?; (Syntax error (or busy))
1359567062: H1-TX: (1) SA;
1359567062: H1-RX: (1) ?; (Syntax error (or busy))
1359567062: H1-TX: (1) CA;
1359567078: H1-RX: (1) ?; (Syntax error (or busy))
1359567078: H1-TX: (1) RA;
1359567078: H1-RX: (1) ?; (Syntax error (or busy))
1359567078: H1-TX: (1) FT;
1359567093: H1-RX: (1) FT0;
1359567093: H1-TX: (1) FT;
1359567109: H1-RX: (1) FT0;
 If you require any more information please don't hesitate to ask, I will create a new fault report for the Winkeyer issue.
Kind regards
Frank G3YQA

Steps To ReproduceN/A
Additional InformationTicket# 360474
TagsNo tags attached.
ModuleRig Control
Sub-ModuleRadio Support
TestingNot Started

Activities

PD9FER

2019-11-12 10:23

updater  

file.pdf (792,347 bytes)

Issue History

Date Modified Username Field Change
2019-11-12 10:23 PD9FER New Issue
2019-11-12 10:23 PD9FER File Added: file.pdf